Evice was completed with prototype-3 in 2020 . three.2. Machine Platform The supporting machine platform gives the essential manipulation, handle, and resource base for operation from the probe together with the ultrasonic wave emitter assembly and, in the identical time, enables the integration of equipment for other rehabilitation approaches (the fundamental spectrum of mechanical and possibly chemical techniques), that are combined in operational practice for accessing the rehabilitated surfaces with the receiving wells for input in the ultrasonic probe. The rehabilitation assembly was developed to be autonomous, i.e., as independent as you can with regards to supporting other machinery and transport equipment, too as N-Acetylcysteine amide Technical Information capable of operating in conditions with no a sufficiently Dorsomorphin Biological Activity powerful electrical connection. The machine platform contains a standardized array of equipment and functions:A crane with minimum lifting capacity of 2500 kg, feasible movement in two axes, and minimum lifting capacity height of 12 m; An AC energy generator with an efficient power of 40 kW and 32 A; A machine winch for the energy cables of your ultrasonic emitters; A steel pipe assembly with a total length of 200 m; The possibility to connect a towed compressor.Controls and Security Attributes Certain controls and security options have been developed for the ultrasonic rehabilitation assembly and had been installed on the machine platform:Electrical switchboard–This device makes it possible for the transfer of power power from its personal aggregate or an external source towards the ultrasonic emitters and the operating pump. This switchboard is equipped with handle and monitoring components for operation with the person emitters, controls, and pump controls, at the same time as integral safety elements for (a) manual and (b) automatic stopping on the cable winding in cases that exceed the secure tension force.frequency converter–This will be the most simple a part of the energy winch conversion cable and permits one to manage the winding speed and reverse the cable (i.e., unwinding).Power cable: Determined by the calculated dimensions for the transmission of 15 kW of ultrasonic energy in the emitter and submersible pump, we used a five m six m energy cable with a grounding selection. Figure four shows the modifications on the control and security elements.Coatings 2021, 11, x FOR PEER REVIEW10 ofCoatings 2021, 11,10 ofFigure four. Operation manage and security elements.Figure four. Operation control and security components.The technicalThe technical information for the technique in Table 1. Table 1. information for the method are listed are listed inTable 1. Technical information Technical data for the ultrasonic set. Table 1. for the ultrasonic set.Technical Data for Individual Emitter Technical Information for Person Emitter Operating frequency 20 kHz Operating frequency 20 kHz Rated energy 2500 Watt Rated power 2500 Watt 4000 Peak power Peak power 4000 Watt Watt Weight approx. 18 kg Weight approx. 18 kg Sound emitting surface 85 185 Sound emitting surface 85 185 mm mm Sound energySound power (nominal/peak)) (nominal/peak)) 12/25 W/cm2 W/cm2 12/25 Modulation Modulation double half wave wave double half Ultrasonic technologies technology magnetostriction Ultrasonic magnetostriction Horizontal range as much as 350 mm350 mm from the borehole wall Horizontal variety up to from the borehole wall Technical Information of the Ultrasonic Device Technical Data of the Ultrasonic Device Type Form B 20/6 B 20/6 Variety of ultrasonic emitters three Quantity of ultrasonic emitters three Total energy Total energy 7.5 KW 7.5 KW Energy s.